Home / Services / Page

Pond Construction, Dredging & Repair

We build new farm ponds, dredge silted ones and repair ponds that won't hold water for acreage owners across the Kansas City metro.

Since 2015

GPS machine control

One crew from clearing to final grade

Licensed and insured

Since 2015

One crew from clearing to final grade

GPS machine control

Licensed and insured

Excavator removing a backyard pool at a Kansas City area home

Pond Services We Provide

New Pond Excavation and Shaping

We cut the basin to design depth, form benches and slopes, and balance cut and fill.

Dam and Berm Construction

We dig the core trench and build the dam from compacted clay, with riprap where the plan calls for it.

Desilting and Dredging

We dig out built-up sediment and restore the pond's depth.

Leak Repair and Sealing

We recompact the core, add a clay or bentonite seal, or install a geotextile liner.

Spillways and Overflows

We set overflow pipe, culverts, headwalls and rock aprons that carry high water past the dam.

Bank Stabilization and Finish Grading

We compact and shape the banks, spread topsoil, seed, and place riprap where water wears the slope.

What Your Quote Covers

Clearing the footprint: trees, brush and stumps out of the pond and dam area.

Drawdown and dewatering: draining the pond and keeping the bottom workable.

Cut, core and dam fill: digging the basin, trenching the core and placing compacted clay.

Spillway pipe and riprap: the overflow pipe, headwalls and rock at the outlet.

Spoil handling: silt and extra dirt spread, stockpiled or hauled off.

What’s not included

engineering or dam design

fish stocking or aeration

hydraulic dredging with water left in the pond

imported clay, unless your quote lists it.

New Pond, Dredging or Leak Repair

Not sure which job you need? We sort it out on the site walk.


New pond

Dredging

Leak repair

Best for

Open ground with runoff to catch, for livestock or a farm pond

A pond that has gone shallow, muddy or weedy as silt filled it

A pond that keeps dropping or shows wet spots on the dam

What we do

Clear, dig the basin, build the core and dam, set the spillway

Draw down, let it dry, dig out the silt, reshape the banks

Find the loss, recompact the core or add a seal or liner

What it leaves you with

A new graded and seeded pond, filling with runoff

Restored depth, with the spoil spread, stockpiled or hauled

A pond that holds its level

Kansas City Site Conditions We Plan For

Clay for the core: metro upland clay seals well when compacted within about 2 points of optimum moisture, so we place the core in lifts and check moisture as we go.

Wet springs: spring rain keeps clay too wet to compact, so we schedule dam work and drawdowns for late summer and fall.

Upland silt: bare or plowed ground above the pond decides how fast it fills again, so we look at the drainage area before we quote a dredge.

How the Job Runs

01

Site walk and quote:

we check the pond, drainage area and access, then quote.

02

Clear and draw down:

we clear the footprint and drain the pond so the bottom can dry.

03

Excavate or dredge:

we cut the basin or dig out the silt with GPS machine control, so depth and slopes match the plan.

04

Build the core, dam and spillway:

we compact clay into the trench and dam, then set the overflow pipe and rock.

05

Handoff:

you get a graded, seeded pond that is filling.

Send us the pond's location and what it is doing, and we will set up a site walk.

Pond Work FAQs

How much does pond work cost?

We quote after a site walk. The main drivers are pond size and depth, dam height, silt volume, drying time, clearing, whether spoil is hauled, and any imported clay.

Do I need a permit to build a pond in Missouri?

Usually not for a small farm pond. The Missouri dam safety permit [ships with pond dams post] covers dams 35 feet or taller that are not mainly agricultural (MDNR, as of November 2026). Farm and stock ponds are generally exempt from federal Section 404 permits, but a recreational pond on a stream or an enlarged dam can need a Corps permit, so confirm with your permitting office and the Corps Kansas City District.

Does the pond have to be drained?

Yes. We draw the pond down and let the bottom dry before we dig. Hydraulic dredging with the water left in is a specialist service we do not offer.

Where does the silt go?

We spread it on your ground, stockpile it, or haul it off with our own trucks once it dries enough to move. Your quote states which, so you know what stays on your ground.

When is the best time to build or dredge a pond?

Late August through October. Water is low, the bottom dries faster, and fall and winter rain refill the pond.

Get a Quote for Pond Work

Tell us whether you need a new pond, a cleanout or a leak fixed, and we will walk the site and quote it. Call ICON at (816) 867-5134 or request a quote at icongrading.com.